UNIMIG RazorWeld 350 MIG/TIG/MMA Welder with Separate Wire Feeder - 3-Phase 415V - 350A - RRP $4,000-$5,000 - Complete Professional Setup
UNIMIG RazorWeld Razor 350 (MIG-350) multi-process inverter welder with Razor 350 x4 separate wire feeder, 350A output, 3-phase 415V, Jasic manufactured.
Description
The UNIMIG RazorWeld 350 is a professional multi-process inverter welding system that covers MIG, TIG, and MMA (Stick) welding in a single package. Built by Jasic, one of the world's largest inverter welding manufacturers, this unit delivers 350A in both MIG and MMA modes on 3-phase 415V power. The separate Razor 350 x4 wire feeder with 4-roll gear-driven drive allows remote feeding, giving the operator flexibility to position the feeder at the workpiece while the power source stays at a distance. The power source features digital amperage and voltage displays, crater current control, adjustable inductance (hard to soft), VRD (voltage reduction device) for safety, and 2T/4T trigger modes.
From the photos, the complete system presents in good used condition. The power source and wire feeder are mounted on a purpose-built UNIMIG wheeled trolley. The power source front panel shows dual digital LED displays, multiple rotary controls for amperage, open circuit, crater current, and inductance, plus toggle switches for MIG/MMA selection, VRD, and 2T/4T modes. The wire feeder panel has rotary controls for wire feed speed (1.5-24 m/min) and voltage (15-38V), plus a standard/push-pull selector and wire inch button. The data plate confirms model MIG-350, 3-phase 415V input, 350A at 40% duty cycle, 221A at 100% duty cycle, IP21S protection, F-class insulation, and RCM compliance. Included accessories visible are a MIG torch (SB36 type), earth clamp with lead, 3-phase power cable with orange industrial plug, gas regulator with flowmeter, and a loaded wire spool.
New UNIMIG Razor 350 SWF systems retail for approximately $4,000 to $5,000. At auction, this complete professional setup represents an exceptional opportunity for any fabrication workshop looking to add or upgrade their multi-process welding capability.
Features
* 350A output in MIG and MMA modes
* 221A at 100% duty cycle (continuous welding)
* Multi-process: MIG, DC TIG, MMA/Stick
* Separate Razor 350 x4 wire feeder (4-roll gear driven)
* Wire feed speed: 1.5-24 m/min
* Standard and push-pull torch capability
* Digital amperage and voltage displays
* Crater current control
* Adjustable inductance (hard to soft)
* VRD (Voltage Reduction Device) for safety
* 2T/4T trigger modes
* Gas check function
* 3-phase 415V input (orange industrial plug)
* Jasic manufactured, UNIMIG branded
* Purpose-built wheeled trolley included
* MIG torch (SB36 type) included
* Earth clamp with lead included
* Gas regulator/flowmeter included
* Wire spool loaded
Specifications
Make: UNIMIG (Jasic)
Model: Razor 350 (MIG-350) with Razor 350 x4 Wire Feeder
Processes: MIG/MAG, DC TIG, MMA/Stick
Input: 3-Phase 415V +/-15%, 50/60Hz
MIG Output: 50A/16.5V to 350A/31.5V
MMA Output: 20A/20.8V to 350A/34V
OCV: 65V
Duty Cycle: 350A @ 40%, 221A @ 100% (40C)
Power Factor: 0.93
Insulation: Class F
IP Rating: IP21S
Cooling: Gas Cool
New RRP: Approximately $4,000-$5,000
Dimensions: 100cm L x 35cm W x 150cm H
Location: Emu Plains NSW 2750
Location of item: NSW, Australia
This item is being offered PICK UP ONLY. Local collection is available, if shipping is required, bidders are encouraged to organise their own freight.
Thinking of financing? Get pre-auction finance ready with Lloyds - Click here & speak to our team today!
ENQUIRIES: Please contact our friendly team on 07 5559 1999 (This asset is sold under standard auction conditions, as is, where is. All photos, descriptions, odometer readings, hour readings, engine specifications and any condition reports should be used as a guide only. The photos are current as at time of book in. Lloyds do not knowingly sell faulty goods. Inspection is highly recommended prior to sale & is the responsibility of the bidder. There is no warranty & no cooling off period)