UNIMIG Pro-Craft 240 MIG Welder - Single Phase 230V - 250A Output - Euro Torch - Gas and Gasless - Italian Made
UNIMIG Pro-Craft 240 MIG/MAG welder, 30-250A output, single phase 230V, 8-position voltage selector, Euro torch connection, gas and gasless capability.
Description
The UNIMIG Pro-Craft 240 is a transformer-style MIG/MAG welder manufactured by AWELCO in Italy and distributed under the UNIMIG Procraft Series banner. With a 30-250A output range on single-phase 230V power, it is powerful enough for serious fabrication while running on a standard workshop power supply. The 8-position voltage tap selector provides precise control over arc characteristics, and the digital amperage display gives real-time feedback. Built to EN 60974-1 welding equipment standards.
From the photos, this unit presents in fair working condition. The black steel casing shows moderate to heavy workshop wear with paint chips, scuffs, and surface grime, but no structural damage. The front panel features a digital red LED display (which appears to be illuminated in the close-up, reading approximately 188A), mode buttons for 2T/4T/stitch/spot welding, a wire feed speed adjustment knob, and an 8-position rotary voltage selector. A Euro torch connector socket is fitted on the left and a dedicated no-gas (flux-core) terminal on the right, allowing both gas-shielded MIG and gasless flux-core welding. The unit sits on an integrated wheeled trolley with gas bottle chains. Included accessories visible are a MIG torch (Euro connector), earth clamp with cable, and mains power cable.
Comparable new single-phase MIG welders in the 200-250A class retail for $800 to $1,500. At auction, this is affordable workshop capability with Italian build quality.
Features
* 30-250A output range
* Single phase 230V input (33.4A max draw)
* 8-position voltage tap selector
* Digital LED amperage display
* 2T, 4T, Stitch, and Spot welding modes
* Euro torch connector (MIG torch included)
* No-gas terminal for flux-core welding
* Duty cycle: 180A @ 35%, 150A @ 60%, 120A @ 100%
* Open circuit voltage: 20-37V
* IP21 protection rating
* Integrated wheeled trolley with gas bottle chains
* Earth clamp with cable included
* Mains power cable with plug included
* Manufactured by AWELCO, Italy (EN 60974-1)
Specifications
Make: UNIMIG (AWELCO, Italy)
Model: Pro-Craft 240 (Model AW 2002)
Serial Number: 10241421
Type: MIG/MAG Transformer Welder
Input: 230V Single Phase, 50Hz, 33.4A max
Output: 30A/15.5V to 250A/26.5V
Duty Cycle: 180A @ 35%, 150A @ 60%, 120A @ 100%
OCV: 20-37V
IP Rating: IP21
Standard: EN 60974-1
Location: Emu Plains NSW 2750
Location of item: NSW, Australia
This item is being offered PICK UP ONLY. Local collection is available, if shipping is required, bidders are encouraged to organise their own freight.
Thinking of financing? Get pre-auction finance ready with Lloyds - Click here & speak to our team today!
ENQUIRIES: Please contact our friendly team on 07 5559 1999 (This asset is sold under standard auction conditions, as is, where is. All photos, descriptions, odometer readings, hour readings, engine specifications and any condition reports should be used as a guide only. The photos are current as at time of book in. Lloyds do not knowingly sell faulty goods. Inspection is highly recommended prior to sale & is the responsibility of the bidder. There is no warranty & no cooling off period)