Portable Pop Up Bar

XPRS Bar Assembly
The XPRS Bar is assembled by fully unfolding the frame. Clamp the cross brace diagonally inside the frame. Insert the kick plate. Insert the large acrylic front panel. Insert the side acrylic panels by flexing them into the U-channels. Insert the preparation shelf and plug fitting. Hook the upper aluminium fascia panel over the top of the frame. Place the serving shelf over the upper fascia panel. The XPRS Bar can be assembled in less than five minutes. The internal open space below the shelf is sufficient for drink stock, refrigerators or cooler boxes. Lower open area dimensions: 127 x 84 x 66 cm. The XPRS Bar can be assembled in less than 5 minutes.
XPRS Bar Work Space
126 x 83 cm (width x depth – preparation shelf)
126 x 37 cm (width x depth – serving shelf)
Note: The recommended maximum safe working load (SWL) for the preparation shelf is 50 kg and 15 kg for the serving shelf.
XPRS Bar Components
• 1x aluminium folding frame
• 1x powder coated aluminium upper preparation shelf (126 cm x 83 cm x 3,5 cm)
• 1x aluminium upper fascia panel (125 cm x 5 cm x 30 cm flat surface area)
• 1x aluminium powder coated serving shelf (133 cm x 25 cm x 15 cm)
• 1x aluminium powder coated kick plate (130 cm x 15 cm x 5 cm)
• 1x aluminium cross brace support with clamps (147 cm x 3 cm tube)
• 1x 3mm opal acrylic front panel (126 cm x 79 cm)
• 2x 3mm opal acrylic side panels (53 cm upper/42 cm lower/73 cm side/60 cm side)
• 1x industry code-compliant 5 cm plug fitting
XPRS Bar Dimensions (unfolded)
• Width 133 cm
• Height 115 cm
• Width (upper edge) 95 cm
• Depth (lower edge) 74 cm
• Distance from upper shelf to floor 84 cm
XPRS Bar Frame Dimensions (folded)
• Height 115 cm
• Width 16 cm
• Side 90 cm
• Side 74 cm
• Depth 95 cm

BID PER EACH

Location of item: 69 Manchester Road, Carrara, QLD, Australia

This is an Auction Sale. High volumes of incoming product prevent our team from being able to inspect all items individually. All photos, descriptions and any condition reports should be used as a guide only. To find out more about this lot or to book a live video inspection please contact the Auctioneer Contact which can be found on the Auction Details page. All 240v electrical items without an electrical plug, must be installed by a licensed electrician.