Cesco Headlight Beam Tester - Floor Standing - Used

Condition: Used

Details
* Brand: Cesco
* Type: Headlight beam alignment tester
* Colour: Red
* Mount: Floor standing on triangular wheeled base
* Construction: Steel body with two chrome vertical guide rails
* Height adjustable headlight target box

Included
* Floor standing unit with triangular wheeled base
* Two chrome vertical guide rails
* Headlight target box with alignment screen and beam dip chart
* Instruction label affixed to rear of target box

Condition Notes
* The unit has been repainted red over its service life. Paint finish shows scuffs, chips and general workshop wear across the body and base.
* The front face of the target box has a circular area of surface corrosion and rust staining around the alignment screen aperture, visible in photos 1 and 2.
* The instruction label on the rear is legible, with some rust staining along the left edge, visible in photo 4.
* The chrome guide rails show light surface marks and minor pitting consistent with workshop use.
* The triangular wheeled base shows paint wear and surface marks.
* The ventilation grille on top of the target box appears intact.
* Untested. Functionality not confirmed.

Manufacturer: Cesco (label reads 'MFD BY CO?????? & SMITH' - partially illegible)

The rear instruction label reads: 'VEHICLE SHOULD HAVE NORMAL NIGHT LOADING / CENTRE OF HIGH BEAM SHOULD THEN BE ON THE HORIZONTAL LINE / TOP OF LOW BEAM MUST NOT BE HIGHER THAN HORIZONTAL LINE / HEADLIGHT TESTER & VEHICLE MUST BE ON SAME PLANE OR SLOPE / LINE UP TESTER WITH VEHICLE BY LOOKING OVER SIGHTS AND ALONG CENTRE LINE OF VEHICLE / TESTER WILL THEN MOVE IN A STRAIGHT LINE BETWEEN LIGHTS / CENTRE TESTER ON HEADLIGHT BY SETTING MARK ON SIDE OF BODY AT HEADLIGHT CENTRE LEVEL'

Location: Woolgoolga, NSW
Inspections: Monday the 12th October, 9am to 1pm
Collections: Monday 19th to Wednesday 21st October, 9am to 4pm
Contact: Tammy - 0458 981 629

Location of item: NSW, Australia

This item is being offered PICK UP ONLY. Local collection is available, if shipping is required, bidders are encouraged to organise their own freight.

Thinking of financing? Get pre-auction finance ready with Lloyds - Click here & speak to our team today!

As Standard Auction Practice all Vehicles are Sold Unregistered and without plates

Buyer is responsible for the safe removal of asset

ENQUIRIES: Contact our Machinery team directly on 0489 996 390 or [email protected] for all enquiries.

(This asset is sold under standard auction conditions, as is, where is. All photos, descriptions, odometer readings, hour readings, engine specifications, and any condition reports should be used as a guide only and have been compiled after speaking with the owners. The photos are current as at time of book-in. Lloyds do not knowingly sell faulty goods. Inspection is highly recommended prior to sale & is the responsibility of the bidder. There is no warranty & no cooling-off period.)