ACME Stage Blinder IP BL-200 WW2 - LED Blinder Fixtures in Road Case - Used

RRP: Not confirmed - pricing available through authorised ACME distributors only
Condition: Used

Key Specifications (from rating plate and manufacturer)
* Brand: ACME
* Model: Stage Blinder IP BL-200 WW2
* Light Source: 2 x 125W LED module per fixture
* Colour Temperature: 2700K (warm white)
* Beam Angle: 50 degrees
* Input Voltage: AC100-240V 50/60Hz
* IP Rating: IPX4
* Control: DMX512, RDM
* DMX Channels: 1, 2, 4 or 6 channel modes
* Fixture Dimensions: 400 x 215 x 200 mm (W x D x H) per unit
* Fixture Weight: 6.8 kg per unit
* Manufacturing Date: June 2017 (visible on one unit)
* Colour: Black

Included
* Assorted ACME BL-200 WW2 Stage Blinder IP fixtures
* ACME branded road case on castors with foam-lined dividers
* Assorted power and data cables stored in side compartment of case
* Safety cables attached to each fixture

Condition Notes
* Used fixtures showing general wear consistent with professional touring use. White identification numbers hand-painted on each unit. Lenses appear intact with minor surface marks visible. Rear panels show light scuffing. DMX display panel and connectors visible on rear of units. CTL test tags visible on fixtures. Road case exterior shows general wear including scuffing to panels and edges. Case latches, handles and castors appear intact. Untested.

Serial Number (one unit visible): UL-081700080

Location of item: 69 Manchester Road, Carrara, QLD, Australia

This item is being offered PICK UP ONLY. Local collection is available, if shipping is required, bidders are encouraged to organise their own freight.

ENQUIRIES: Please contact our friendly team on 07 5559 1999 (This asset is sold under standard auction conditions, as is, where is. All photos, descriptions, odometer readings, hour readings, engine specifications and any condition reports should be used as a guide only. The photos are current as at time of book in. Lloyds do not knowingly sell faulty goods. Inspection is highly recommended prior to sale & is the responsibility of the bidder. There is no warranty & no cooling off period)