UNRESERVED Ex-Gov Hafco Metal Master Centre Lathe

Make: Hafco Metal Master
Model – CL-38A
Year: 2014
Serial Number – 140235

Description – Hafco Metal Master Centre Lathe, owned since new, said to be in good used working condition. The centre lathe has had little use and has been stored in a small workshop since purchase. For the last 5 years it has been disconnected from 3 phase power due to the workshops reduced capacity. Assortment of attachments and tools to be paired with machine.

Specifications:
MAKE: Hafco Metal Master
MODEL: CL-38A
(mm)Swing Over Bed: 410
(mm)Distance Between Centres: 1000
(mm)Spindle Bore: 52
(mm)Swing In Gap: 580
(mm)Swing Over Cross-slide: 255
Digital Readout System Fitted - yes
Quick Change Toolpost Fitted: yes
Leadscrew Covers Fitted: yes
Coolant System: yes
(mm)Tool Height To Suit: 20
(mm)Centre Height: 205
Spindle Nose Size or Type: D1-6 Camlock
(mm)Bed Width: 250
(MT)Headstock Spindle Taper: 6
(MT)Tailstock Taper: 4
(mm)Cross Slide Travel: 210
(mm)Compound Slide Travel: 140
Leadscrew Type: Metric
(mm/rev)Metric Cross Feed (X-Axis): 0.025 - 0.85
(mm/rev)Metric Longitudinal Feed (Z-Axis): 0.05 - 1.7
(No. / mm)Metric Thread Steps & Pitch: 39 (0.2 - 14)
(No. / TPI)Imperial Thread Steps & TPI: 45 (2 - 72)
(mm) 3 Jaw Chuck Diameter: 200
(mm) 4 Jaw Chuck Diameter: 250
(No. / rpm)Spindle Steps / Speeds: 16 (45 - 1800)
(kW / hp)Motor Power: 3.3 / 4.5
(V / amp)Voltage / Amperage: 415
(kg)Nett Weight: 1550

NOTE: BUYER RESPONSIBILE FOR SAFE REMOVAL OF ASSET, FORKLIFT AVAILABLE ONSITE FOR LOADING

Collections by appointment and to occur within 7 days after auction has closed, once full cleared funds have been received.

Location: Cairns QLD
Contact: Jamie 0486 045 295

Location of item: Onsite, Cairns, QLD, Australia

This item is being offered PICK UP ONLY. Local collection is available, if shipping is required, bidders are encouraged to organise their own freight.

Thinking of financing? Get pre-auction finance ready with Lloyds - Click here & speak to our team today!

As Standard Auction Practice all Vehicles are Sold Unregistered and without plates

Buyer is responsible for the safe removal of asset

ENQUIRIES: Contact our Machinery team directly on 0489 996 390 or [email protected] for all enquiries.

(This asset is sold under standard auction conditions, as is, where is. All photos, descriptions, odometer readings, hour readings, engine specifications, and any condition reports should be used as a guide only and have been compiled after speaking with the owners. The photos are current as at time of book-in. Lloyds do not knowingly sell faulty goods. Inspection is highly recommended prior to sale & is the responsibility of the bidder. There is no warranty & no cooling-off period.)