2018 Josnet 7x4 Pantec Box Trailer - Single Axle, ATM 1750kg - Purpose-Fitted with Camp Kitchen, 12V System, Century Battery, Anderson Plug, Side Access Compartments, Roof Rack - Bringelly NSW
A 2018 Josnet 7x4 Pantec Box Trailer that was purpose-built and fitted out as a self-contained field support unit, previously used by an adventure touring operation. The compliance plate confirms Josnet manufacture, July 2018 build date, ATM 1750kg, and tare 580kg. The VIN is verified on both the chassis stamp and the manufacturer's plate. This is not a bare box trailer. It comes with a functional internal fitout that gives a new owner a significant head start on a touring, support, or field operations trailer.
The body is an enclosed pantec box on a single-axle chassis, painted cream/white. The front face is clad in aluminium checker plate with a centre-mount spare tyre carrier and a full-size 235/75R16 all-terrain spare wheel. A tubular steel roof rack runs the full perimeter of the roof for overhead load carrying. Both sides have large gas-strut-assisted lift-up access panels secured with T-handle compression locks. Inside, the fitout includes a slide-out camp kitchen tray on drawer runners, a Century Marine Pro 780 deep-cycle battery, a power inverter/charger, expanded mesh shelving and dividers. The trailer has a 240V power inlet on the exterior and an Anderson 50A connector on the drawbar for vehicle-to-trailer charging. Both side compartments are independently accessible and the partition dividers allow the interior to be reconfigured. The rear has a drop-down tailgate access panel.
The trailer has seen genuine use in its adventure touring life and shows it. The paintwork has fading and remnant ghost signage from the previous operator. The coupling and safety chains have heavy surface rust and should be inspected before towing. The lower storage compartment floor has surface corrosion at seams. The roof rack has some minor distortion from likely minor impact. None of this is unusual for a 7-year-old trailer that has been used for field work, and none of it prevents the trailer from being used once the coupling is attended to. The Century battery and 12V system condition would need to be confirmed on-site.
For a buyer fitting out a touring support trailer, a 4WD club gear trailer, an outback expedition unit, or a campsite support vehicle, starting with this already-fitted platform is significantly cheaper than building from scratch.
Features
* Single axle, ATM 1750kg, tare 580kg (compliance plate confirmed)
* July 2018 manufacture, Josnet 7x4 Pantec model
* Enclosed pantec box body, cream/white painted steel
* Aluminium checker plate front face
* Full-size spare tyre and wheel (235/75R16 all-terrain) front-mounted
* Tubular steel roof rack, full perimeter
* Gas-strut lift-up side access panels (both sides), T-handle compression locks
* Slide-out camp kitchen/cooktop tray on drawer runners
* Century Marine Pro 780 deep-cycle battery
* Power inverter/charger unit
* 240V exterior power inlet
* Anderson 50A connector on drawbar
* 7-pin flat trailer plug for tow vehicle connection
* Expanded mesh shelving and divider panels
* Rear drop-down tailgate access panel
* 235/75R16 all-terrain main tyres, white sunraysia rims (both sides)
* Swing-away jockey wheel
* 50mm ball coupling with safety chains
* Single beam axle, leaf spring suspension
Condition Notes
* Coupling head and safety chains have heavy surface rust. Inspect and assess before towing. Coupling replacement recommended.
* Lower storage compartment floor shows moderate surface rust at seams and edges. Not perforated. Monitor and treat.
* Drawbar/chassis paint is chipping and showing rust at joints, welds, and coupling area.
* Roof rack shows surface rust at joints and has minor distortion on one section (possible minor impact damage).
* Front aluminium checker plate has multiple redundant drill/bolt holes from removed accessories.
* Previous operator signage ("echo Adventure Tours") ghost visible on body panels after decal removal.
* Axle leaf springs and suspension components show surface rust consistent with age.
* Battery and 12V system condition to be confirmed on inspection.
Specifications
Year: 2018 (July 2018 manufacture)
Make/Model: Josnet 7x4 Pantec
Body: Single axle enclosed pantec box trailer with fitout
ATM: 1750 kg
Tare: 580 kg
Tyre Size: 235/75R16
Coupling: 50mm ball
Location: Bringelly, NSW
VIN: 6T9T27R06J09H4001
Location of item: NSW, Australia
This item is being offered PICK UP ONLY. Local collection is available, if shipping is required, bidders are encouraged to organise their own freight.
Thinking of financing? Get pre-auction finance ready with Lloyds - Click here & speak to our team today!
As Standard Auction Practice all Assets are Sold Unregistered
For the safety of our extended family, Lloyds Staff is strictly enforcing social distancing regulations. We are open for inspection Monday to Friday 8am to 5pm and on Saturday via appointment.
Lloyds Team Members are not qualified automotive/marine specialists and as such, Lloyds can not provide/conduct mechanical or condition reports with any lots offered at auction. All photos, descriptions, odometer readings, hour readings, engine specifications and any condition reports should be used as a guide only and have been compiled after speaking with the owners. For your peace of mind, Lloyds recommends personal inspections as well as seeking a third party specialist / mechanic to inspect any asset on your behalf prior to bidding. This asset is sold under standard auction conditions, as is, where is, with no warranty or cooling off period expressed or implied.
To enquire about this asset please call Auto Team on 0485 867 059