Kingsland Ultima 60 Hydraulic Ironworker - UsedCondition: UsedKey Specifications (from data plate)* Brand: Kingsland Engineering Co. Ltd.* Model: Ultima 60* Type: Hydraulic* Capacity: 60 ton* Origin: Made in England* CE MarkedWork Stations Visible* Punching station* Flat bar shearing station* Angle cutting station* Section cutting (round and square bar)* Notching stationData Plate Capacities (as read from plate)* Punching: 24 x 20 mm, 24 x 12 mm, 57 x 8 mm, 38 x 8 mm* Shearing - Flat: 240 x 20 mm, 375 x 10 mm* Shearing - Angle Iron: 100 x 12 mm* Section Cutting: Round bar 45 mm, Square bar 45 mm* Angle Cutting: at 90 deg 130 x 13 mm, at 45 deg 60 x 8 mm* Notching: Rectangular up to 40 mm wide, 100 mm depth, material thickness 10 mmIncluded* Foot pedal control* Detached side panel* Detached safety guards and covers* Material support barCondition NotesThe machine is presented in used condition, sitting on a timber pallet. General wear, grime and paint chipping are visible across the body of the machine. The work table surfaces show surface rust. The control panel features Start, Stop, Emergency Stop, Hold-Down, Mitre/Normal/Notch and Notch Guard switches, all appearing intact. The hydraulic motor is visible in the base cabinet. One side panel has been removed and is leaning against the rear of the machine, showing significant paint loss and surface rust. Safety guards and covers have been removed and are placed on the ground beside the machine. A material support bar is also placed on the ground nearby, showing surface rust. The base cabinet doors and drawers show wear and paint loss. untested. Approx Dimensions: 200h x 170w x 80d cm.Serial Number: XL 60 1?35??
Location of item: 4-10 Keon Parade, Thomastown, VIC, Australia
Auction Contact: Sapphire 0437 707 579 ENQUIRIES: Please contact our friendly team on 07 5559 1999 (This asset is sold under standard auction conditions, as is, where is. All photos, descriptions, odometer readings, hour readings, engine specifications and any condition reports should be used as a guide only. The photos are current as at time of book in. Lloyds do not knowingly sell faulty goods. Inspection is highly recommended prior to sale & is the responsibility of the bidder. There is no warranty & no cooling off period)
Bidder Registration Required. Thank you for your support and interest in this property, how exciting! We have sent you an email, please reply with a copy of your photo ID to complete your registration and confirm your eligibility to bid on this property. Upon sending your ID this confirms you have Read and Agreed to the Terms & Conditions of this Auction. Thanks again for your support and good luck with the Auction!
Please click this link to resend that email
Email sent successfully. Please check your mailbox.