Fuel Injection Test Set - Used

Condition: Used

Kit Contents
The kit is presented in a red plastic carry case with a contents diagram affixed to the inside of the lid. Visible contents include:
* Two pressure gauges — one larger gauge reading 0–100 PSI and 0–1000 kPa, and one smaller gauge
* Assorted rubber hoses with brass fittings
* Assorted brass adapters, banjo fittings, CIS fittings and swivel fittings
* Contents diagram and parts legend affixed to inside of lid

The contents diagram (photo 4) lists the following components across two trays:
* A — 3 1/2' Gauge
* AC — 3 1/2' Gauge Protector
* AE — 2 1/2' Gauge
* AD — 2 1/2' Gauge Protector
* D — Gauge Hose w/relief valve
* G — CIS/TBI Hose Assembly w/valve
* X — Ford Hair Pin Hose
* W — Ford Spring Lock Hose
* XA — GM/Chrysler Hair Pin Hose
* F — Double End Hose Adapter
* E — Single End Hose Adapter
* M — 8mm x 1.0 Male CIS Fitting (2)
* H — 8mm x 1.0 Male CIS Fitting (Long)
* J — 10mm x 1.0 Female CIS Fitting
* HA — 8mm x 1.0 Female CIS Fitting (Long)
* I — 10mm x 1.0 Male CIS Fitting
* L — 8mm x 1.0 Female CIS Fitting
* K — 12mm x 1.5 Female CIS Swivel Fitting (2)
* KA — 14mm x 1.5 Swivel Fitting Male & Female
* KB — 16mm Swivel Fitting Male & Female
* KC — 1/4' BSPT Swivel Fitting Male & Female
* N — 8mm x 1.0 Banjo Fitting
* O — 8mm x 1.0 Banjo Fitting
* P — 10mm x 1.0 Banjo Fitting
* Q — 12mm x 1.25 Banjo Fitting
* R — 12mm x 1.5 Banjo Fitting
* RA — 14mm x 1.5 Banjo Fitting
* C — 308 x 32 Adapter Hose Ford EFI
* B — 3/4' x 20 Adapter Hose GM/Chrysler
* V — 3/8' x 18 Male Fitting (2)
* U — 16mm x 1.5 Male Tube Adapter (2)
* T — 14mm x 1.5 Male Tube Adapter (2)
* UB — 14mm x 1.5 Female Tube Adapter (2)
* UA — 14mm x 1.5 Female Tube Adapter
* UC — 14mm x 1.5 Male Plug
* S — 1/8' x 18 Union
* RK — Repair Kit
* IM — Instruction Manual

The components are loose within the case rather than organised in the moulded tray. Completeness of all listed fittings and adapters cannot be confirmed from the photographs.

Condition Notes
The carry case shows significant wear, scuffing and discolouration to the exterior. The label on the outside of the lid is heavily faded and largely illegible. The interior contents diagram remains legible. The latches and handle appear intact. The name 'AUTHENTIC AUTO' is written in marker on the case lid. The gauges and brass fittings show signs of use. The rubber hoses appear intact with no visible cracking in the photographs. Untested.

Included
* Red plastic carry case
* Two pressure gauges
* Assorted hoses, adapters and brass fittings as visible in photographs
* Contents diagram affixed to lid

Location: Woolgoolga, NSW
Inspections: Monday the 12th October, 9am to 1pm
Collections: Monday 19th to Wednesday 21st October, 9am to 4pm
Contact: Tammy - 0458 981 629

Location of item: NSW, Australia

This item is being offered PICK UP ONLY. Local collection is available, if shipping is required, bidders are encouraged to organise their own freight.

Thinking of financing? Get pre-auction finance ready with Lloyds - Click here & speak to our team today!

As Standard Auction Practice all Vehicles are Sold Unregistered and without plates

Buyer is responsible for the safe removal of asset

ENQUIRIES: Contact our Machinery team directly on 0489 996 390 or [email protected] for all enquiries.

(This asset is sold under standard auction conditions, as is, where is. All photos, descriptions, odometer readings, hour readings, engine specifications, and any condition reports should be used as a guide only and have been compiled after speaking with the owners. The photos are current as at time of book-in. Lloyds do not knowingly sell faulty goods. Inspection is highly recommended prior to sale & is the responsibility of the bidder. There is no warranty & no cooling-off period.)