2025 Able Generator

Model: PL75X3
Serial No.: BH10068/22
Running hours: 0.6

RRP: $18,900

Specifications:

Prime Power 60kW | 75kVA
Standby Power 66kW | 82kVA
Power 105 Amps (Prime per Phase)
Phase/Power Factor Three Phase | 0.8 Power Factor
Voltage 415
Frequency 50 Hertz
Engine XINCHAI AK41LD31
Fuel/Motor Type Diesel
RPM 1500
Cooling Method Water Cooled
Alternator Three Phase 4 Pole Brushless Synchronous -/c AVR
Starter System 24 volt Electric - Battery Included
Controller COMAP AMF5 | 2 Wire / Remote Start Capable
Noise Level 67 dBA at 7m
Fuel Tank Capacity(Litres) 420
Running Time 22 Hours Continuous (prime load)
Fuel Consumption 19 L/hr (prime load)
Mine Spec Mine site ready bunding
Hardwire Terminals Yes
Outlets 1 x 15 Amp IP66 (single phase) | 1 x 20 Amp IP66 & 2 x 32 Amp IP66 (three phase)
Chassis Lockable | Sound Deadening | Weather-reistant powder coating |Stainless steel fittings
Compliance RCD: Australian Standard (IP67 Enclosed)
Overload Capacity Over Current Protection
Weight (KG) 2027
Length(cm) 242
Width(cm) 95
Height(cm) 164
Shipping Weight (KG) 2027


SOLD AS IS

Location of item: 504 Stuart HWY, Winnellie, NT, Australia

This item is being offered PICK UP ONLY. Local collection is available, if shipping is required, bidders are encouraged to organise their own freight.

Thinking of financing? Get pre-auction finance ready with Lloyds - Click here & speak to our team today!

As Standard Auction Practice all Vehicles are Sold Unregistered and without plates

Buyer is responsible for the safe removal of asset

ENQUIRIES: Contact our Machinery team directly on 0489 996 390 or [email protected] for all enquiries.

(This asset is sold under standard auction conditions, as is, where is. All photos, descriptions, odometer readings, hour readings, engine specifications, and any condition reports should be used as a guide only and have been compiled after speaking with the owners. The photos are current as at time of book-in. Lloyds do not knowingly sell faulty goods. Inspection is highly recommended prior to sale & is the responsibility of the bidder. There is no warranty & no cooling-off period.)